PISO-PS400 PCI Bus High-speed 4-axis Motion Control Card with FRnet Master

PC based motion control solution is one of the dominant component in building semiconductor related machine, namely Automated test handler machine, laser marking machine, Automated tape an reel machine, Test and handler vision inspection machine etc.

The PISO-PS400 is a 4-axis stepping/pulse-type servo motor control card that can be used on any IPC with PCI bus, and is suitable for general-purpose motion control applications. These card equipped with one FRnet Master which allows the fast remote I/O of the IPC to be expanded easily. The two-wired FRnet interface allows a maximum 128 DI and 128 DO channels, which are automatically scanned within a period of 2.88 ms.

In addition to its wide speed range, this intelligent motion controller also has a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration, numerous synchronous actions, automatic homing, and others. A major advantage is that the majority of the PS400 series motion control functions are performed by the high-performance motion ASIC with little load on the processor. The motion status, FRnet I/O, and the other I/O cards on the IPC can still be monitored while driving the motors.

As the low CPU loading requirements of the PS400 series is minimal, one or more motion cards can be used with a single IPC. ICP DAS also provides a variety of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.

Independent 4-axis motion control
Support for hand wheel and jog functions
2/3-axis linear / 2-axis circular interpolation function
Continuous interpolation function
Programmable T/S-curve acceleration and deceleration
A maximum pulse output rate of 4 MHz for each axis
Pulse output types: CW/CCW or PULSE/DIR
32-bit encoder counter for each axis
Encoder pulse input types: A/B phase or Up/Down
Programmable automatic homing for each axis
Programmable software limits
A wide range of synchronous actions (event-triggered actions)
Expandable Remote I/O: 128 DI & 128 DO via a two-wire FRnet interface

● Microsoft windows 7 / 10 driver supported

● SDK / Sample codes for software programming like C#,C/C++,Visual Basic ( Labview optional) supported

You may also like…